Difference between revisions of "Md380tools on Pi-Star"

From PiStar Wiki
Jump to navigationJump to search
Line 9: Line 9:
 
   sudo apt-get install gcc-arm-none-eabi binutils-arm-none-eabi libusb-1.0 libnewlib-arm-none-eabi make curl python-pip
 
   sudo apt-get install gcc-arm-none-eabi binutils-arm-none-eabi libusb-1.0 libnewlib-arm-none-eabi make curl python-pip
  
4.
+
4. Install pyusb to support the USB connection to the radio
 +
  sudo pip install pyusb==1.0.0b1
 +
 
 +
5.

Revision as of 18:32, 22 May 2017

1. Confirm that you have a large enough SD card in your Pi-Star, we need at least a 4G card. The base image will work on a 2G card, but for md380tools we need a LOT more space!

2. Confirm that you are running Pi-Star 3.3.9 or newer (you need this version for a patched version of 'raspi-config'

3. Expand your filesystem to fill your card.

 sudo raspi-config

3. Install the supporting tools;

 sudo apt-get install gcc-arm-none-eabi binutils-arm-none-eabi libusb-1.0 libnewlib-arm-none-eabi make curl python-pip

4. Install pyusb to support the USB connection to the radio

 sudo pip install pyusb==1.0.0b1

5.